0151 924 9494
Motorisation Specialists Motorised
from £180.59

Fabric Box Cellular Motorised V Series

Blenheim Blackout White Mist

View product information

Enter Your Measurements
Min 600mm. Max 2900mm
Min 200mm. Max 4000mm
   Lowest Price Guaranteed
   Last order date for a pre-Christmas dispatch is 03/12/2024.
Orders made after this date will be dispatched when we reopen in January
   Child Safety compliant with EN 13120
Motorisation Specialists Motorised
from £180.59
Fabric Box Cellular Motorised V Series

Blenheim Blackout White Mist

View product information

  • 25mm Thermal Cellular Fabrics up to 2900mm wide

    Powered by a Somfy Lift & Tilt 25 RTS Motor 

    Details
  • Product Specification

    The Recess allowance for this product is 10mm

    The headrail is 32mm deep x 44mm high 

    The bottom bar is 26mm deep by 16mm high 

    The motor supplied is a Somfy Lift & Tilt 25 RTS battery-powered motor, complete with an external battery pack.

    Any remote control and chargers needed should be added to the order here 

    Fabric Specification

    Blackout Efficiency
    5 / 5 -
    1. Sheer / Voile

    Softens the light coming through & offers a diffused view outside

    2. Semi-Transparent

    A little heavier than a voile, gives light and an element of daytime privacy

    3. Translucent

    Allows light to pass through the fabric but retains privacy

    4. Dim-Out

    Blocks most of the light but not 100%

    5. Blackout

    No light penetrates the fabric

    Features
    Blackout

    Specifications
  • Measuring guide

    View measuring guide

    Fitting guide

    Fitting Guide here 

    Guides

Measuring Guide

Measuring for inside a Recess

First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely. Look out for protruding tiles, pipes, skirting boards etc.

Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production this is called recess size

Your blind will arrive slightly smaller than the recess size, it will then hang freely within the recess at the correct size.

If you want to make your own allowances order as ‘exact’ which is explained below.

Measuring for inside a recess
Measuring for outside a recess or exact

Measuring for outside a recess or Exact

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances, or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

Remember on most blinds the fabric will be less than the overall width of the blind ordered. You should allow for this when measuring outside a recess.

We will make your blind to your exact sizes. The blind in its brackets/headrail/cassette (widest point) will be supplied exactly to the size that has been ordered. this is called exact size Subject to the normal manufactures working +/- tolerances

Whether measuring for a recess or exact please remember the fabric will always be narrower than the overall blind size to allow for components such as side controls and brackets.
This varies depending on the product, Roller blinds for example have a fabric width 30-34mmn less than the overall blind size.
Contact us if you require clarification regarding your chosen product.

Measuring for Bay Window

Determine the depth of the blinds you are mounting and use this for the width of your cardboard: Contact us for Blind depths.

Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.

Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".

Repeat this step for the right side angle, marking points "C" and "D".

Measure between points "B" and "C" to obtain the width measurement of the center blind.

Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.

Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.

Deduct about 5mm from each of your measurements to allow for clearance, and order Exact

Measuring for bay window Measuring for bay window diagram